Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Tarzana, CA
Gate access control problems in Tarzana usually come down to two things: the heat takes out a control board or keypad, or the hillside south of Ventura Boulevard puts enough stress on the gate that sensors and locks work themselves loose. We fix both. Most access control repairs in Tarzana run between $145 and $650 depending on what failed, and we hand you a written price before any work starts. Call (805) 516-0479 and a live person answers, day or night.
Why Tarzana Homes Are Different
Drive through Tarzana and the housing stock tells you exactly what kind of gate repair you’re going to find. North of Ventura Boulevard, the 1950s and 60s ranch homes still carry their original tubular steel swing gates and chain link, hardware that’s been opening and closing for fifty-plus Valley summers. South of the Boulevard is a different world: custom estates on sloped driveways around Braemar Country Club, heavy ornamental iron gates on automated operators that fight gravity every single time they close.
That gravity load is the thing most out-of-area techs miss. A gate motor on a flat Encino lot cycles against friction alone. The same motor on a Tarzana hillside driveway burns through its rated cycle life 30 to 40 percent faster because it’s lifting the gate’s full weight against the slope on every closing cycle. Add San Fernando Valley heat, triple digits through August and September, and you get thermal expansion throwing limit switches out of calibration and control boards cooking inside their enclosures. Gates here fail differently than gates by the coast, and the repair approach has to account for it.
Our Main Tarzana Services
These are the three services Tarzana homeowners call us about most often, each with a dedicated page covering the work in detail.
Gate Repair in Tarzana
Most repair calls in Tarzana start with a gate that won’t open, a gate that won’t stay open, or a scraping sound that’s been getting worse for weeks. On the south side, the slope load usually means a hinge has worn oval or a weld has started to crack; on the north side, older hardware simply reaches the end of its service life. See what typical repairs cost and what we check first on the Gate Repair in Tarzana page.
Gate Installation in Tarzana
New gate installation in Tarzana has to respect the grade. A gate spec’d for a flat lot will sag and bind within a year on a sloped driveway. We measure, write the scope, and build for the actual conditions, including heavier posts and a higher torque class operator where the grade calls for it. Get the full breakdown of materials, permitting, and timelines on Gate Installation in Tarzana.
Gate Motor & Opener in Tarzana
Operators on Tarzana’s south side work harder than the manufacturer’s cycle rating assumes, which is why experienced local techs spec up one torque class on replacement units. That single decision extends motor life dramatically. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Details and motor pricing are on the Gate Motor & Opener in Tarzana page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Tarzana
Gate access control in Tarzana means the systems that decide who gets in: keypads, intercoms, card readers, phone entry, and the wiring and control boards behind them. The Valley heat is hard on these components. Control boards mounted inside metal enclosures on south-facing posts can hit 140°F in August, and keypads exposed to direct sun for a decade will delaminate and fail. On gated hillside estates, a dead access control system doesn’t just mean parking on the street, it means delivery drivers, landscapers, and guests can’t reach the property at all. Getting the right repair depends on knowing what’s installed and what failed, and keeping a documented record of both. That’s the core of our Gate Access Control work, and it’s why every visit includes a written record of what was found and what was replaced.
Keypad Entry
Signs you need it
Buttons work intermittently or not at all, the keypad lights are dead, or codes stop accepting after rain or heat waves.
What it costs in Tarzana
Keypad replacement in Tarzana typically runs $145 to $410, depending on whether we’re matching an existing wired keypad or installing a new weather-sealed unit.
How we do it
We test voltage at the keypad, confirm the control board is receiving signal, replace the unit with a weather-sealed model rated for Valley sun, and reprogram codes with you standing there.
Video Intercom
Signs you need it
The camera shows a blank screen, audio cuts in and out, or the door strike won’t release when the call button is pressed.
What it costs in Tarzana
Video intercom repair or replacement in Tarzana typically runs $285 to $850, depending on whether it’s a wired unit on an existing mount or a new wireless system with multiple monitors.
How we do it
We trace the wiring from the gate station to the house, identify whether the failure is camera, audio, or power, and replace only what’s failed, then photograph the completed installation.
What Gate Access Control Costs in Tarzana
| Item | Typical range in Tarzana |
|---|---|
| Keypad replacement | $145 - $410 |
| Video intercom repair | $285 - $850 |
| Control board replacement | $175 - $520 |
Can you fix a keypad the same day in Tarzana?
Yes. We stock common keypad models on our trucks serving Tarzana, so replacement is usually completed the same day. Call (805) 516-0479 and a live person will confirm what’s available.
Do you work on the intercom already installed at my Tarzana property?
We service the major brands and will repair your existing system rather than push a replacement. If the unit is obsolete, we’ll show you compatible options at three price points before any work begins.
Gate Parts & Welding in Tarzana
Gate parts and welding in Tarzana covers the physical structure under the automation: hinges, posts, rails, rollers, and the weld joints that hold ornamental iron together. On the south side, Santa Ana winds push laterally against tall, heavy gates, and the weakest point is where a scroll or finial meets the frame. Weld joints fail there first. North of Ventura, older tubular steel gates rust at the hinge barrel or the post base long before the automation gives out. Our Gate Parts & Welding work is about fixing the structure so the motor isn’t fighting a gate that’s already sagging.
Hinge Replacement
Signs you need it
The gate sags visibly, scrapes the ground on the latch side, or the hinge pin shows play when you lift the gate.
What it costs in Tarzana
Hinge replacement in Tarzana typically runs $135 to $285 per hinge, depending on the weight and the condition of the post underneath.
How we do it
We support the gate, remove the old hinge, inspect the post for rot or cracking, weld or bolt a new hinge in place, and photograph the completed work.
Gate Rollers
Signs you need it
The gate rolls roughly, jumps the track, or you can see flat spots or missing ball bearings on the roller wheels.
What it costs in Tarzana
Gate roller replacement in Tarzana typically runs $95 to $195 per roller, including the wheel, bearing, and adjustment.
How we do it
We remove the gate from the track, replace the rollers, clean and align the track, and test the gate through its full travel before we leave.
What Gate Parts & Welding Costs in Tarzana
| Item | Typical range in Tarzana |
|---|---|
| Hinge replacement | $135 - $285 per hinge |
| Gate roller replacement | $95 - $195 per roller |
| Custom welding repair | $120 - $350 |
Can you weld a broken gate on site in Tarzana?
Yes. Our trucks carry mobile welding equipment, so most ornamental iron repairs are done on site the same visit. Call (805) 516-0479 for an exact quote.
Do you replace just the part or the whole gate?
We replace only the failed part unless the structure isn’t safe to repair. Your written quote shows both options with photos, so you choose with the full cost in front of you.
Brands We Service in Tarzana
We work on Viking, Ghost Controls, DoorKing, and Elite systems, along with LiftMaster, FAAC, BFT, Linear, and Mighty Mule. Common boards, remotes, and safety edges for these brands are stocked on our trucks. See the full list on our brands page.
Pricing for Gate Repair in Tarzana, CA
| Service | Typical range in Tarzana |
|---|---|
| Keypad replacement | $145 - $410 |
| Video intercom repair | $285 - $850 |
| Control board replacement | $175 - $520 |
| Hinge replacement | $135 - $285 per hinge |
| Gate roller replacement | $95 - $195 per roller |
| Custom welding repair | $120 - $350 |
| Service call and diagnosis | $49 - $110 |
| Gate frame straightening | $150 - $475 |
What pushes the price up in Tarzana is grade, weight, and access. A hillside gate south of Ventura needs heavier hardware and more time to set correctly. The written price you get before we start is the price you pay. No surprise invoices, no verbal adjustments.
Neighborhoods We Serve in Tarzana
We cover the full span of Tarzana, from the ranch homes north of Ventura Boulevard to the hillside estates around Braemar Country Club. Here are a few of the neighborhoods we work regularly:
- Braemar Country Club area
- South of Ventura Boulevard hillsides
- North Tarzana ranch neighborhoods
- Melody Acres
- Tarzana Hills
Most Tarzana calls are reached within 60 to 90 minutes, with same-day service for urgent repairs.
Service Area - Cities Near Tarzana
Vance Gate Repair also provides gate repair, gate installation, and gate automation service to neighboring San Fernando Valley communities. If you’re in Reseda, CA, Winnetka, CA, Canoga Park, CA, or Northridge, CA, the same written-price, documented-work standard applies.
Serving Tarzana, CA - Our Local Coverage Area
We’re based in the Tarzana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Tarzana
Most Tarzana calls are reached in 60 to 90 minutes. A live person answers the phone 24/7, so you’ll know exactly when a technician is on the way before you hang up. Call (805) 516-0479.
Some gated Tarzana communities and hillside HOAs require approval before visible changes to a gate or entry system. We provide the written specs and material list your HOA board usually asks for.
Service calls in Tarzana run $49 to $110 for diagnosis, and that amount is applied toward the repair if you choose to proceed. You’ll always see the full price before work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Tarzana Customers Say
"They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B.